Tecsis EZE30 Digital Amplifier

Tecsis

Ürün No: EZE30
Üretici: Tecsis
Confirmed Rating: ☆☆☆☆☆☆ (4.1)
Rating Count: 1337

Tecsis markalı, EZE30 koduna sahip Tecsis EZE30 Digital Amplifier isimli ürün hakkında detaylı bilgi almak için lütfen canlı destek ekibimiz ile hemen iletişime geçin ya da bir online teklif formu doldurun. Size en kısa sürede dönüş yapacağız.
PLEASE MAIL TO: info@allinstock.net

Datasheets for Tecsis EZE30 Digital Amplifier

Description for Tecsis EZE30 Digital Amplifier

Digital amplifiers are used to adjust the mV/V-output signal of strain gauges to a connected control. The model EZE30 comes with an integrated LED-display which allows also to display the measured data immediately. Controllers can be connected through the many interfaces. The amplifier has 3 relay outputs, one analogue output, one serial RS-422/485 interface and 3 logical inputs. The model EZE30 series is designed for lightly dynamic and static applications for example weighing. The user-friendly device for top hat rail mounting comes with big screw-type terminals, a LED-display and keys which can be used to operate the amplifier or to set its parameters.FeaturesAmplifier for strain gauges with LED-Display mountable on top hat railsCan be configured via keyboard or PCDigital output signal via serial RS-422/RS-485 interfaceFreely programmable analogue output (2-20 mA)3 freely programmable limit contacts3 logical inputs for remote controllLimit frequency up to 20 Hz for quasi static applicationsAccuracy 0,002 % of full scaleUp to 4 strain gauges with 350 ohm parallel connectableSupports 6-wire technologyBridge supply 5 VDCNeeded power supply 12-24 VDCUser friendly and easy to maintain because of big screw-type terminals, keys and LED-DisplayEasy communication via big set of ASCII-commandsProtection class IP 40ApplicationBecause of its high accuracy and speed of the A/D converter the amplifier EZE30  suits especially well for weighing but also can be used to measure and monitor forces at engines. Measured data and the status of the in- and outputs are displayed on the 5 digit digital display. It is possible to connect all kinds of strain gauges (max 4 sensors, 350 ohm) with an output signal up to ± 3,2 mV/V. The internal sensor supply is 5 VDC. The internal sensor supply is 5 VDC. Usually the amplifier is not pre-adjusted and the customer connects it to the force transducer and also adjusts it. The amplifier can be programmed either by keyboard or by ASCII-commands via pc. A menu guides the programming. The keys also allow to tare and to set a new zero-point. Through a standard terminal programm it is possible to communicate via the seriel RS-485 interface. A software with oscilloscope function which runs under windows is also available. The 3 relays can be used to monitor if limit values are underran or overtraveled. The analog output, which can also be programmed freely offers a 2-20 mA output signal for analog processing. The many possiblities to adjust filters allow to damp interfering signals.

Latest Comments for Tecsis EZE30 Digital Amplifier

İlginizi Çekebilecek Ürünler Tecsis