Ringfeder RfN 7013.0 Locking Assembly

Ringfeder

Номер продукта: RfN 7013.0
Продюсер: Ringfeder
Confirmed Rating: ☆☆☆☆☆ ☆ (3.5)
Rating Count: 10819

Вы можете заполнить форму онлайн-предложения или связаться со службой поддержки в режиме реального времени для получения информации. Ringfeder бренд, RfN 7013.0 продукт. Мы свяжемся с вами как можно скорее.
PLEASE MAIL TO: info@allinstock.net

Datasheets for Ringfeder RfN 7013.0 Locking Assembly

Description for Ringfeder RfN 7013.0 Locking Assembly

These Locking Assemblies are of single-taper design with a self-locking taper providing good self-centering action and concentricity, as well as increased torque capacity. A pre-centering hub section is not required. Integral push-off screws for disassembly are provided. This unit can be placed deep inside a bore due to it’s design. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter.Characteristics Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point. This prevents a bending and lifting of the inner ring during installation and therefore a good dismantling is ensured. High rotation speed – the Locking Assemblies remain true-to-form during assembly and so they are suitable in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies makes them especially suitable for applications with high radial loads.   Example applications crane running wheels couplings gearwheels flywheels fan wheels Mounting of Locking Assembly The Locking Assemblies are supplied slightly oiled and ready-to-use. The values for T, Fax, pW and pN apply to Locking Assemblies in delivery condition. Surface finishes For shafts and hub bores Ra = 1,6 μm Tolerances We recommend the following mounting tolerances Shaft: h8; Hub: H8 Change of screw tightening torques A change of the TA-values given in the above table is not admissible.

Latest Comments for Ringfeder RfN 7013.0 Locking Assembly

Другие рекомендуемые продукты Ringfeder